The Asus AiMesh has gained a lot of popularity when it comes to a WiFi working station. If you are looking to improve the WiFi coverage in your home or your work station, there can be nothing better than the Asus AiMesh if you want to use it regularly.
If you are looking to buy the Asus AiMesh WiFi station, here is a complete review of the Asus AiMesh with Asus RT-AC86U and RT-AC68U that you must consider. You can go through this Asus Aimesh review to know how it can improve your internet surfing experience.
If you are thinking about what AiMesh is, it is a network solution which you need to know. The product is a complete device that helps you to pick your configuration when you can easily create with the help of an entire system. It works with a proper router and a WiFi mesh which you can set up to improve the speed and the streaming.
This gives you a good amount of flexibility with the product which you can easily afford because of the low budget. Thus, keeping the future in mind, it can be a great option to use the AiMesh router if you are looking for an upgrade.
The AiMesh was launched by the manufacturer as a firmware update which allowed all the users of the RT-AC86U and RT-AC68U to get proper results. This is a firmware update that has been provided to the routers to get better working features. When we compare the AiMesh to most of the other products available, it has more features than others.
This duly allows the mesh WiFi network without getting the proper expandable options and to get the high-performance mesh. So you will always get proper performance even when the network is a bit complicated.
Why Choose AiMesh?
High WiFi Connection
The one reason why you will love the AiMesh is just because of the strong coverage that it provides. Because of the setup, the AiMesh allows you to combine the power of multiple routers to get proper attestation with the WiFi signal. The AiMesh practically works like an Enterprise Wireless Networks which will help you to get access points.
Because of this, the AiMesh can always give you higher modes of the network which will give you the best results. The system can automatically help you to get the best link to get the proper connection. So you can get the option to connect to the best link available for you.
If you are using any WiFi extender, you may have experienced many complicated relations while connecting to the network. If you connect to such networks, the speed may just slow down and you may not be able to work properly with it. If you face such issues, you may have to manually change the network. Having the AiMesh with your network is a complete solution for this.
This is mainly because you can get only one major network to connect with. In fact, it uses the same WiFi name and the password which will give you the proper results. In fact, it is just easier for you to automatically roam to the faster network and without any issues.
The one thing that impressed us the most is the option to get the roaming assistants with the node. Because of the seamless connection feature from AiMesh, it becomes much easier for the users to get proper results.
For this, you can pick up any router or working station, but having the selective models from ASUS will give you better results. This is mainly because of the 2.4 GHz and 5 GHz connections. This will give you the option to steer the best band available.
The next thing that may attract you the most is the option of flexibility. The AiMesh allows you to combine several WiFi networks available. This will allow you to customize the number of access points according to the budget that you can choose. Coming to the use of the AiMesh, there are 4 Ethernet ports available. So this is more integrated than any regular WiFi system.
If you consider making a parent router, the one thing that you must make sure is to make it configured with better hardware. The AiMesh will give you this option and also get proper results for setting up a network.
If you need a better WiFi speed and a better network configuration, you will always need a proper Ethernet. This will allow you to get a faster networking option. The AiMesh has default configurations that allow you to connect to the Ethernet whenever available. So you can always prioritize the available internet connection.
Moreover, if you configure them to the AiMesh mode, they are completely functional. Thus, it may not be effective in reducing speed and network availability at all.
If you are having the AiMesh, the one advantage that you will get is to able to configure through the main router. This will allow you to sync the entire network which is available. You can also do the steps easily if you download the ASUS Router application. The application has access to every mode and so it is easier to check for every device which is connected.
Coming to the firmware maintenance, AiMesh allows you to maintain it from the main router. In fact, you can set it for Auto-update that will give you to update the router with different models that are being used.
How to Setup AiMesh?
When it comes to the complete configuration, the AiMesh has easier steps compared to any other WiFi station. You can do it either with the help of the web interface or with the ASUS Router Application. However, going for the web interface will be easier for you.
Here, you will have more features and easier steps. For setups, there are two main parts including the Main router and then the AiMesh Node which we have mentioned below.
Main Router Setup
If you already have the AiMesh supported router, you can easily follow the steps below to get proper configuration:
- The first thing that you need to do is to update to the latest firmware available. You can download it from the official website of ASUS.
- Once you are done, just install it and then go for a factory reset. This will clean up the old configurations with the router.
- You need to wait for a while to update the firmware. Once it is done, you need to configure it with the AiMesh Node Setup.
AiMesh Node Setup
1. To start the configuring process, you need to make sure that the AiMesh router already has the updated firmware. You can do it by following the steps which are mentioned above. Make sure that you have not connected the AiMesh node with the Ethernet Cable.
2. Once it is on, you need to connect the AiMesh to the main router. You can easily do this with the help of the AiMesh present at the bottom of the screen.
3. Once you are done, you can look for the suitable nodes which are available. You can easily search for it to form the AiMesh network. However, you need to make sure that the node is present in the factory reset state.
4. After this, allow the router to detect the AiMesh available. In this process, the router will try to authenticate the connection and will end it by establishing it. The process may take long and up to 10 minutes since the router is new.
5. To speed up the process, you can put the AiMesh closer to the main router. It will help the router to quickly find the node.
6. Now, once the process is over, you can find the AiMesh node already present under the node. If it is not, repeat the process for one more time.
7. For your convenience, you can easily more the AiMesh node to a better spot where it will be closer to the main router. This will always give you the option to get the best performance out of the router.
When it comes to the AiMesh network, the performance is one thing that you would always want to get reviewed. The AiMesh has real good hardware which means that the product can be well configured for boosting the performance. When we tested the network with ASUS routers, we found it to be working well. The most impressive part is the efficient mechanism.
Coming to the bands, the AiMesh has dual options which include both 2.4 GHz and 5 GHz. It is specifically a Tri-band model that allows you to get a dedicated mesh network. To configure this, the system may take some time in the beginning, but it works efficiently as well.
WiFi Roaming Performance
If there is anything that you may find a little less in the AiMesh is the seamless handoff ability. We feel that the performance in such specifications may be a bit tight for the product, but it does an amazing job as well. The one thing that we liked about the most is that the AiMesh has complete access to the configuration. So you can always prioritize any device which you want to have the highest speed with.
All that you need to do is to use the ASUS Router app. With the help of this application, you can easily allow the device to get connected with the strongest mesh node that is available. It is very decent when it comes to performance over the Roaming.
Using AiMesh with Asus RT-AC86U and Asus RT-AC68U
If you are using the AiMesh, the best router support that you can get is definitely with the Asus RT-AC86U and Asus RT-AC68U. These two routers are specifically configured in such a way that it can handle vast mesh networks.
We tested both these routers and you can follow our review on it to know more. Simply scroll below to know all about the Configuration, Problems, and Testing while using AiMesh with Asus RT-AC86U and Asus RT-AC68U.
The configuration with both the Asus RT-AC86U and Asus RT-AC68U is simple and it involves very few steps. You can easily set up one router as the main Asus node and then use the AiMesh to get configured. It can be done with the help of the web interface as well as the application.
For this, all that you need to do is to update the router to the latest Firmware available. Once you are done with this, you simply have to run the ‘Find AiMesh node’ to allow the router to get an established connection. The process may take up some time, but it is very easy to complete.
You may face some minor problems while working with the Asus RT-AC86U and Asus RT-AC68U. One of the major problems is that even after downloading; it may not get established at times. This is very common if you are using the Asus RT-AC86U and Asus RT-AC68U. To get rid of it, you need to reset the router and then install the older firmware on the mesh node.
So instead of updating the router to the latest firmware, you need to update the mesh node on the older firmware. This will allow you to get connected with the mesh node.
While testing the AiMesh with Asus RT-AC86U and Asus RT-AC68U we got to know that things could be a bit tricky. This is mainly because of the features and system settings. Some of the features will only work with the mesh node unless you implement them.
However, the testing results seem to be quite decent. We tried to test the network with difficult locations and it worked almost perfectly. This is mainly because there are different access points present with the AiMesh.
Asus RT-AC68U is an awesome AC1900 router. We have compared it with an AC1750 router in this piece of content. Do give it a read.
The Asus AiMesh Setup is a complete solution for your Internet requirements. If you are using it with the Asus AiMesh with Asus RT-AC86U and RT-AC68U, it will require some DIY steps which can give you proper results to your needs. However, if you are using the AiMesh, it will always give you proper results to fulfill the internet requirements.
Using proper routers always increases the performance and the DIY setup for the Asus AiMesh with Asus RT-AC86U and RT-AC68U is a classic example of it. Apart from this, you can also take the help of ASUSWRT which will give you the best features that will give you proper features at any time. We hope we answered all your questions in our article on Asus Aimesh Review.